Here are a couple of thoughts on a more effective deadlift.
A common point of energy waste in the deadlift is the initial lift of the weight from the ground. That exact moment the weight comes off the ground should be the first upward movement of your body as well.
You would think this is intuitive. But if you watch deadlift videos on Instagram and Youtube, you’ll notice that a lot of people start their lift with their butts. Before the weight lifts off the ground, their hips have already moved up a few inches. You might notice this about yourself, too.
This is inefficient channeling of energy through the legs, and takes away from upward movement of the weight.
You can develop a better deadlift by minimizing this power leakage from the start. The aim is absolute tension and rigidity before the “pull” (what we call the lifting portion of the deadlift). By doing this, you will be able to maintain good form throughout the lift, keeping your back neutral, knees out, and head aligned. This will minimize and even prevent your upper back from curving forward into a slouch.
To create the most effective output, focus on the setup. Once you grab the bar:
Straighten your arms
Push your feet into the ground
Pull up against the bar just short of lifting it to anchor yourself into the ground.
Pull back on your shoulder blades, like the wings of a jet folding in after take-off.
If someone came by from any direction and pushed you, you would not be budged. No looseness in any part of your body, upward, downward, or sideways. Everything should be rock solid and ready for take off.
Your back should have a straight arrow pointing through it from top of the head through the end of your butt.
As you take hold of the bar, focus on one spot on the ground in front of you and do not look away. This helps with keeping the head in a neutral alignment with the rest of your spine.
And here goes. I like Mehdi Hadim‘s two-part cue the best:
Push the ground away from you
When bar passes knees, slam your hips forward into the bar
You now stand upright with bar held at arms length.
Pull in a belly breath and lock it into your lungs for abdominal pressure.
Let down the weight in the exact reverse way. Start with hips moving back, keeping tension in butt, hamstrings, knees and feet.
When the bar reaches your knees, allow them to start parting and bending, maintaining full tension.
Do not drop the weight. It’s sloppy and rude, and it will mess up your back and everyone’s eardrums. Think Batman. Be quiet, be swift, and be gone.
I’ll send one on grip next. Try these with minimal weight first. As in, just the bar. Or a broomstick.
If you’re just joining this newsletter, welcome. This newsletter is here to bring you unusual yet effective techniques to learn powerlifting. You can find the first newsletter about learning the squat in the archives above. I suggest you go over the mental imagery and cues in that one first before proceeding with the tips in this letter. Practice them and become comfortable with them.
Torque: The Core of all Human Movement
Let’s get deeper on the squat, now that we’ve covered the basics. Continue to practice sets of five squats, body weight, and deepen your understanding of the importance of Torque. For those of you who did not pass physics, torque is rotational force. Squeeze a towel dry and you are creating torque by twisting it.
Every human movement and power output is generated by torque. Our bodies, our skeletal systems, are designed to create force by rotation. This is true for walking, where our back foot propels us through inward rotation of the hip, translating frictional force from the ground up through the abdomen to the shoulders.
It’s true for a simple bicep curl, where our wrist, elbow, and shoulder all pull against each other in rotational motions to bring up an object that is gripped in our hands. Gripping things is also a work of torque, where each finger joint is pulling with rotational force against the next finger joint, and the bones of the hand pull in rotationally against the muscles that lead to the forearms, to secure an object within our grasp.
To understand that torque defines all human movement will give you a better mastery of your body mechanics. The squat is no different as a combination of several systems of torque.
Feet Spread the Floor: Revisiting the Starting Stance with Torque
The well-established starting stance of the squat (see first post for more details) begins with flexing your butt, which creates outward rotational force on your thighs. Your femurs rotating outward place torque on your shins, and this creates torque on your ankles. When your ankles are being pulled outward, your feet, pointed forward, are creating torque against the ground by rotating outwards as well. They are not actually moving outwards, but the force created from your hips allows you to grip the ground through your feet.
This is why thinking of “feet spreading the floor” gives you a good cue to create that rotational force as you prepare to squat.
Creating “the Pillar” out of your abdomen, or taking in a breath to your belly and tightening the abs against it, allows the force from the ground to travel through your torso to the bar or weight without getting lost in bending or twisting motions. If your torso is soft, or extending, or otherwise not rigid through the squat, you will lose the torque created at the ground along the path through your body to the weight on your upper back.
So, before loading weight or a heavy bar for squats, familiarize yourself with performing the exercise with a rigid Pillar of a torso. This is where mobility of the hips, knees, and ankles is essential for allowing your torso to remain upright and solid through the movement. Limitations on joint mobility will tempt you to compromise your torso stability in an effort to get lower in the squat. We’ll talk more about mobility in a bit.
Knees Out: Torque Preservation Throughout the Squat
“Knees out” is also a mental cue that encourages preservation of torque through the squat. As you pull yourself down into the hole, and up out of it, keeping your knees pulled outward maintains torque and a stable transfer of power from the ground through your body.
You absolutely must not allow your knees to buckle in. This is the most important rule for the knees in the squat and all other strength building exercises. The structure of your ligaments keeping your knee together can be replicated by crossing your middle finger over your index finger. Do this with your right hand. Now grab this structure with your left hand, and twist your right hand out, or to the right. This is similar to your right knee pulling out to the right during the squatting motion.
You’ll notice that your twisted fingers, representing the ACL and PCL in your knee, tighten up and become stronger when rotated out to the side. Now, as you maintain your hold with your left hand, twist your right hand the other way, inwards to the left. You’ll notice that your fingers untwist from each other, much in the same way that your knee ligaments become unstable and lose torque.
When you’re squatting, with or without weight, getting up from the ground or the chair or out of the car, you’re using torque to do so. Depending on how your knee is positioned, you are either creating stability in the knee or you are exposing it to an unstable position. Under weight, it is crucial that you maintain “knees out” for the most stable mechanics.
Pulling Down, and Butt Back vs. Hamstrings Back: Getting Deeper on the Squat
“Pulling down” is the best way to think of the descent on the squat. Rather than letting yourself down, or dropping as free weight, thinking of “pulling down” on yourself helps to keep yourself in a stable, torque-locked state.
If you are finding it hard to pull down near the top or the beginning of the squat motion, think of “sitting back into a low chair” or “bending down to pick up a corgi running towards you”. The backwards pull from this imagery may allow for release downwards.
Do you find it hard to pull down near the bottom or the hole, or notice from video of yourself that you are “butt winking”? By butt wink I mean that right at the bottom of the squat, your lower back curves and your butt tucks in. This is a very unstable position of the spine and breaks the solid pillar that you are trying to maintain.
Remedy by thinking of “hamstrings back” rather than butt back. Shoving your butt back too far at the beginning of the squat can tilt your hips too far forward, and prevent your femurs from fully rotating out towards the bottom of the squat. That forces your pelvis to tilt back down, to allow your femurs to rotate out and your body to lower into the hole. Thus, your pillar is broken.
You need your hips at a constant angle, keeping that pocket of motion open for your thighs. This also may require some mobility work. For now, practice the squat as far down as you can go, without compromising your pillar. Think “hamstrings back” and “pull down”.
Practice the Bar Position
At this point, if you feel comfortable with the mechanics of the squat, you can practice gripping and holding the bar during the squat with a light wooden pole or broomstick (remove the broom part if you can).
Even if you are intermediate or advanced on the squat, it is always good to know your mechanics at body weight. Can you get down to the correct position? Are you able to create torque without weight on your back?
Grip the pole at just outside shoulder width. Pull the pole up above your head, arms straight. Get into the stable starting stance, and once you’ve created the pillar, bring the pole down behind your head.
Let the pole rest just below your cervical vertebrae, the pointy neck bone at the top of your spine. With your arms flexed in a bent position, you will create a muscular “shelf” between the rear shoulder muscles and the trapezius muscles just above them. Keep the pole snug in this groove.
Flex your shoulder blades tight, back and down. Grip hard on the pole. Tighten your Pillar, feel the torque as your feet spread the floor. You are in the ready stance with a bar, now.
Establish the bar position. Your wrists may not be mobile enough today to get into a full gripped, just outside shoulder width, bar position. If so, move your hands out a little further, and try bringing the pole down into position. Hold it there, allow your joints to loosen up and adjust, and progressively work on moving your hands to just outside shoulder width.
None of the three-finger grip nonsense that is going around, or the gripping the ends of the bar, or the plates. Having correct bar grip and position is critical to stability and joint health down the road.
I used to think meditation was for religious people, or Buddhist monks. I first tried it in high school though and noticed some very real benefits to sitting, breathing, and focused mind exercising.
More than just “clearing” the mind, it’s a practice of setting yourself back to zero. Equilibrium.
Meditation helps me to take root in myself and come from a place of solid foundation. I’m aware of myself, who I am, why I think and feel what I do in specific situations, and how I react to cues. Knowing this through quiet breathing and awareness of the things that live in my mind allows me to let it go and just be myself.
During my first powerlifting meet, breathing and awareness helped me to stay calm and focused. More than the amount of weight I was attempting, the newness of everything, the nervousness of being there for the first time, and being in front of the judges and spectators could have been an overwhelming wave of stimuli. I warmed up a bit and went to my car to turn on the emWave2, for some breathing, calming down, and focusing. This substantially leveled me out and positioned me to utilize all my skill and strength that I had built up during training. I successfully achieved my goals for squat and deadlift. Bench press wasn’t a great concern, but I did hit a PR as well.
Some short and long term benefits of meditation that I experience:
Self awareness. Seeing where thoughts come from, identifying fears.
Letting things go that are necessary baggage
Reduces effects of lack of sleep
Focus and concentration improve
Ability to be clear minded in the middle of stressful situations
increases oxygen to the brain and rest of body
Pure joy and bursts of laughter, if you get deep enough long enough
Helps relationships, from increased self-understanding
Mind healing. You become aware of traumas, sources of stress, and become empowered to work through them.
For powerlifting, it’s invaluable. Anything that requires a high level of performance can benefit from focused breathing and mental equilibrium.
At the 2014 California State Championships in Irvine, I pulled my first “official” deadlift of 391 lb. Watch me take a deep breath in and out before grabbing the bar, in front of the judges and everyone.
I didn’t really know if that was gonna come across as weird, but I wanted to give it a try because it’s something I do at the gym before challenging sets. Most often, at the peak of our performance demands, the challenge isn’t in our musculoskeletal capabilities, but in our minds’ ability to allow that power to be released in full.
On my hardest training days, when I had trouble getting myself to put on my shoes and get out the door, it was a battle of my mind. I didn’t want to face the heavy weight on the bar, for fear of failing, fear of getting injured, fear of being weak. I dragged myself many times to the gym when I did not want to go. And when I got there, most of those days I performed better than ever once I tucked my head under the bar and lifted it off the rack. The key was to jump through the fear, grip the bar, and do what I knew I could do.
Tim Ferriss encouraged me through his book, The 4-Hour Workweek, to “feel the fear and do it anyways.” He challenges his readers to identify the worst case scenario, the thing we feel most afraid of, and when we do that, we realize it’s not so bad after all.
To do this, especially in the moments of paralyzation from our greatest fears, it helps to have trained yourself to go the route of courage. I’m more able to face challenges now if I am meditating regularly and identifying my weaknesses, my kryptonites, and simply knowing that they exist. I recognize my weaknesses in real time because I know them. I practice pausing before I react, focus on the problem at hand, and harness my resources and skills to effectively address the problem.
When the problem is a heavy weight in front of me, and fear of getting crushed by it, getting injured, or embarrassed, it’s in the mind that I first address all of this. I take a moment away from the bar, close my eyes, and take a deep breath or two or three. I concentrate on the breath going out, revel in my brain’s love of oxygen, and come back to my core self. I become me again, let go of the thoughts and nagging possibilities, and when I’m clear and strong, I open my eyes and step up to the bar.
Only then can I grip the bar, suck in air, and crush it.
Note: the links to the EmWave2, which is a heart-rate variability device used to aid in meditation, and the book The 4-Hour Workweek by Tim Ferriss, are affiliate links with Amazon.com. I get a percentage of their sale if you use the link to make a purchase. I only share things that have made a significant impact on my life in this blog. Hope you check them out and enjoy!
I had a great session of strength training this past weekend and I did it all barefoot. Try it! Some things to note when powerlifting barefoot:
Have fun! That’s what it’s all about.
It’s building the arches back into my flat feet. Don’t let the fact that you have flat feet keep you from trying this, if you have the same problem I do. I have noticed an improvement from just three sessions of barefoot squats.
You will realize that your feet are like specialized hands to stabilize you. Use them to grip the ground.
If it’s not a barefoot-friendly gym, try gathering the big weights close to your squat rack before taking off your shoes. Don’t want to be wandering the gym without shoes.
Minimize the number of steps back you take when unracking the bar for a squat. Doing it barefoot will make you realize how important it is to plan the position of your feet. You don’t want to overdo the backwards steps with all that weight on you. I was able to take just one step back for each foot, without hitting the rack during the squats.
Start light. Like any major change in your strength training routine, you want to build up to it, not crash into it. I have been practicing barefoot walking outside for the past six months, and have been very careful with my form when lifting barefoot. I do my mobility and warmups barefoot as well, to get my feet accustomed. So far, so good!
Have you tried this? What differences do you find, if any, between lifting barefoot and lifting with shoes. And, what shoes do you wear for lifting?
Have I told you about butter coffee? Creamy, smooth, and delicious, it gives me immense energy and focus. I first started having this concoction with breakfast, and found that it helped me in strength training. Eventually, I just had more butter with it and didn’t eat breakfast at all. I now go the entire day without any other meal, until dinner.
When I drink this concoction, I get mental clarity, sustained focus, and a predator state of mind and body that is unparalleled by energy from any other food. If I haven’t made it for you already, I’ll show you how so you can experience it for yourself.
At first, your body will need to learn to effectively absorb nutrition from fat. This takes several days to weeks for some people, especially if you are not in the habit of eating a lot of fat. Most self-described healthy eaters do not eat much fat. Keep your regular meals at first and just have this coffee with breakfast or an hour before training. You want to feel it out and do what works best for you.
Basic Butter Coffee Recipe
30-35 grams of coffee beans for two cups of single source coffee
Two tablespoons grass fed butter
One teaspoon high quality MCT oil
Boil water (or start brewing if using the basic coffee machine)
Throw the butter and MCT oil into a large blender
Brew the coffee and add it to the blender
Hold down the top of the blender lid with a dish towel and blend on high for 20 seconds
Of course to make it even better, here are things to consider:
Get The Best Ingredients
The quality of your ingredients lends to the flavor, level of energy, and creativity you will get from your cup.
Single Source Coffee for Clarity
Single source coffee beans are grown, harvested, and processed on one estate or farm. All other beans, sometimes called blends, are mixtures of beans from two or more estates. Single source beans come without the added time of storage and transportation. Coffee is vulnerable to mycotoxins, which can cause headaches and jitters. Mycotoxins are inevitable, but through good practice and minimal exposure to the environment they can be suppressed. The less time from harvest to your cup the better. I didn’t know how much of a difference this would make until I gave single source coffee a try. I noticed significantly better results. Even when I was tired, I had calm mental clarity from it, not just a jittery buzz. No crash in energy, and no headache. Now I always look for coffee that lets me be even-keeled and fierce. There are two types I drink primarily, but you can find others if you look for them.
I found a great tasting single origin coffee in a local store. I really enjoyed the flavor of this light roast. It was from Alto Mayo Estate, a single coffee farm in a mountain region of Peru. The coffee smelled amazing, roasty and smooth. I had great results from this coffee every day, feeling clear minded, focused, and strong when I drank it. If you have a quality grocery store nearby, find a single source coffee with the roast intensity that you enjoy most.
The key to finding good coffee anywhere is to verify that it says “single origin”,”single source”, or”single estate”. I don’t pay attention to the phrases Fair Trade, Shade Grown, and Certified Organic. While they do hold social value, they also warrant a higher price tag. Whatever you choose to buy, drink it and test it yourself for absolutely positive symptoms. Do not assume it’s good based on the label or the price. The whole point is to find something that allows you to accomplish greatness.
With that being said, some blends may be okay if they are from the same roaster. If you know the beans are roasted at the same facility and are blended there, they may be as good as single source. But again, try the coffee and make sure it brings you mental clarity and sustained focus.
Grass Fed Butter: Nourish Your Soul, Body, and Mind
Grass fed cow butter is the key to creating the smooth frothiness of your concoction. It’s important that the butter is from grass fed cows. Cows that are 100% or almost completely fed on grass are healthier and happier beasts. Butter from such beasts makes me a happier beast. The ultra nutritious elements like healthy saturated fat, CLA, omega-3 fat, butyric acid, vitamin K2, vitamin E, and beta carotene are elevated in cows that eat grass only. There are two types I tried, and both are excellent.
The most reliable brand that I get from Trader Joe’s or Whole Foods is Kerrygold Unsalted Butter. It’s an awesome Irish butter that comes in one-cup bars. If you don’t have a store nearby, you can get in online. It’s a little more than the store price, but it is worth it if you can’t get it anywhere else. I get a box of 20 at a time and stock them in my freezer.
My other go-to butter is harder to find on the west coast of the U.S., but it can be found in some other countries more easily. I love Anchor Unsalted Butter from New Zealand grass fed cows.
On a recent trip to Asia I was stoked to find Anchor butter from a Jakarta store. I had never used it before, but it was surprisingly good in my coffee. The subtle flavor and smooth texture pair well with the cacao and vanilla I use.
The Best Quality MCT Oil
MCT turns the light switch on in my head. Medium chain triglycerides (MCTs) are fatty acid chains of 8 and 10 carbons in length. C-8 and C-10 fats absorb through the gut into the bloodstream to the brain fast, where they can be utilized as energy in the form of ketones.
Ketones have been found in research to be more efficient brain fuel than glucose, and I feel the difference. When my brain has this fuel source, I have more clarity, better mental function, longer sustained focus, and no crash. It also brings my body into a fat-burning mode. This has been shown to help regulate body weight, and it’s certainly proven true for me. MCT oil is usually derived from coconut and palm kernel oil, and there can be a very slight coconut scent to it.
There are several different brands out there, and the quality of the MCT oil is determined by purification and processing. Purification affects the concentration of C-8 and C-10 versus other types of fat that are not MCT. Processing includes how the coconuts are stored and pressed, and where they are from.
NOTE: This fuel is intense! I recommend using the regular MCT oil first. It will help to make a smoother transition to this different energy source.
Bulletproof XCT Oil I used to have this regularly in my coffee before I tried Brain Octane oil. It has both C-8 and C-10 fatty acids. This is a good starting point if you haven’t tried MCT oil. It isn’t as intense as Brain Octane, and I think it would be the best choice for learning the effects of MCT oil on yourself before venturing into the more intense version. Flavor is slightly more coconuty than the following Viva Labs oil that I also have used. This is a very clean product that I can rely on for top performance.
I have used high quality coconut oil before in my coffee, when I ran out of MCT oil. Coconut oil will add a lot of flavor, but in my opinion it’s overbearing. Also, it is not a sufficient substitute for MCT oil. There is only a very small percentage of C-8 and C-10 fats in coconut oil, contrary to common belief. The majority of advertised “MCT” oil here is C-12, which actually does not act like the shorter chains in energy utilization.
With that being said, if this is your only source of MCT, it will still provide you with some benefits of fat-based brain energy. And I’ve talked to some friends who really love it. Plus it’s delicious for cooking chicken curry dishes. Maybe I’ll post on that later. If you’re getting all of your MCT from coconut oil, use four tbsp or more. As a flavor or C-12 supplement, use one or two tbsp.
Flavor and Creativity
These next few ingredients are what make my butter coffee taste so good, compared to ones you find here and there in shops and cafes. I add these elements every time I make my concoctions, and have had the most amazing conversations with friends, breakthroughs in strength training, and mental performance after having it.
This is my favorite hack for butter coffee. Vanilla bean has amazing flavor and also has flavonoids that enhance creativity. I add this without fail to my coffee concoction every morning.
Second only to vanilla bean, cacao butter is another flavor and nutrient must-have for me. It’s the pure fat of cacao beans and this is what they use to make white chocolate. Cacao butter gives a rich, gourmet scent and flavor to the coffee. It has the concentrated elements of chocolate that enhance your creativity and brain power.
I add chocolate powder to my butter coffee to make it rich and dark. Good chocolate, like good coffee, has flavonoids and antioxidants that enhance brain and performance. Gauge the flavor, it can be rich and quite bitter. Start with about a teaspoon or less.
My coffee has no sweetener, but my wife likes hers a bit sweet. This stuff of nature is the perfect solution if you want to be in ketosis yet want that rich sweetness in your coffee. This will not trigger your insulin response, unlike sugar. And it tastes naturally sweet, unlike stevia.
Xyla North American Hardwood Xylitol. The best type, pictured here, is made from North American birch trees. The cheaper brands are made from Chinese GMO corn. I recommend using one to two teaspoons per cup to start. It has about the same sweetness as regular cane sugar.
Building Blocks and Fuel
These ingredients can be added as needed for the different types of activities you do on any given day. Add these one at a time and observe whether you benefit from them.
Grass Fed Collagen
Collagen is one of the building block of your tendons, skin, and hair. It is needed for repair of tissue after training, and makes your skin more vibrant when you provide yourself with enough. Unlike whey protein, which caused gas and bloating, collagen has been problem-free for my digestion. For these reasons it is great for strength training, tissue repair, and skin and hair boost.
BULLETPROOF® Upgraded Collagen Protein Super fine-grade and from grass fed cows. It’s processed with enzymes rather than heat, which prevents damage of the proteins. I generally only add collagen on the day of, and up to three days after, a training session.
Collagen does make me hungry after about four hours, which causes a slight decrease in focus. This is because protein triggers an insulin response. With protein, you will get similar, but not as drastic, effects as when you eat carbs. After strength training, this isn’t a problem, since I will eat anyways. But on normal days without training, I forgo the protein in the morning.
My wife, on the other hand, has it every morning in her butter coffee. She simply feels better and more energetic with some protein. Use at least one tablespoon.
I add a baseline dose of creatine every morning with my coffee. Without causing huge swelling of muscles, this simple nutrient has allowed me to maintain strength and muscle mass for longer periods of time between training sessions. It is one of the key supplements I use to increase longevity of strength. Creatine also boost brain function.
Now Foods creatine monohydrate This brand has been my go to for years. No side effects, suggesting it is clean and pure. Use 1 teaspoon or 5 grams daily.
METHODS TO MAKE MAGIC
I’m laying this recipe out for first time dabblers in butter coffee. The way you make your coffee will affect how it feels, tastes, and energizes. Even for more veteran practitioners, small hacks can give you a better concoction. To have delicious butter coffee it must be three things: Hot, well-brewed, and well-blended. How you set up the ingredients and the order in which you prepare it can be the difference between a floating oil slick and a creamy concoction of joy.
Prepare Water First
Start a kettle on the stove before anything else, as you will need time to prepare the other ingredients and want the water hot when you’re ready to brew. If you’re using a normal coffee maker, get it all set up with beans and start brewing. Use spring or well water for the best flavor. Water has as much flavor and texture as any other ingredient that goes into coffee. Make your coffee with tap water and you’ll taste the tap.
For the Pour Over technique, prepare about a quarter cup more water than the amount of coffee you plan to make.
As the water heats, get all your ingredients into the blender. You will need one that holds at least four cups or one liter, because the liquid will expand like crazy when you blend it. I use the KitchenAid blender, which is not the highest-end thing out there, but works just fine for this purpose:
Note: The stronger the blender, the finer the foam. You can get an incredibly smooth concoction with the VitaMix Blender.
Brew the Coffee Into the Blender
You can brew your coffee however you choose. If all you have is the classic coffee maker, just use that for now. My all time favorite method of coffee brewing is the Pour Over technique. Coffee tastes the best when I make it this way, but a close second is the French press, and honestly after that it’s just the normal coffee maker.
The Pour Over Technique
The pour over technique requires a kettle with a thin pouring spout, as well as a filter cup and filters. Here is how I brew pour over.
Boil water in the dripper kettle and turn off heat.
Grind coffee beans to slightly finer than medium granularity. Any finer and it will take forever to brew and you will get too much acid. This is how fine you want your grounds for pour over brewing:You can use an electric grinder like the one I have above or a hand grinder if you want to have more evenly ground beans. This takes a lot more time and effort though.
Fold the crimped edge of a paper filter, open up the filter, and place into the ceramic cup.
Wet the filter paper by pouring just enough hot water along the edges of the cup. This gets rid of the flavor of the paper.
Dump the ground coffee into the filter paper.
Starting from the center of the cup, slowly pour water in an outward spiral until you cover all the beans with water. The grounds will start to breathe and expand. Let the gas escape and as the grounds deflate, continue to pour in the same spiral manner until you have poured all the water. The pouring should take about 3-4 minutes total.
Brew directly into the blender to save time and keep your coffee hot. Here’s an honest picture of my set up, dirty dishes and all. I want to give you an idea of how you can brew directly into the blender. Note that with my blender in the dish rack, it allows me to brew at a more comfortable level than if the blender were up on the counter top:
Once the coffee is brewed and in your blender with the other ingredients, place the lid on securely and cover the top with a dish towel. Hold down the towel over the lid tight while you blend it on the highest setting for 20 seconds. Depending on the quality of your blender, the coffee may punish you if you don’t hold it down.
Marvel at the creaminess.
Keep the rest in a thermos and drink it through the morning.
These are my two favorite containers for coffee.
The Thermos is larger and holds a full two cups of coffee, fairly hot through the day.
The Zojirushi is smaller but keeps coffee radioactive hot the entire day.
Up the dosage on the butter and MCT oil slightly after a week or two, if you can glean the benefits without having the runs. You can always lower amounts the next time if you don’t feel as good of an effect.
Don’t change the MCT dosage drastically. Try increasing by a teaspoon each week, making sure to observe the quality of focus. You don’t want to end up dizzy or give yourself digestive issues by taking too much in the beginning.
If you’re hungrier, add more butter. Try increments of one tablespoon. Use the minimum effective dose.
That is it. Try it in the morning, about an hour before a training session, or before any task that will take a lot of brain or body power. You’ll be restless the first few times if you don’t have a world or two to save.
I had butter coffee as fuel for a 370 lb. squat and 391 lb. deadlift at my first powerlifting meet, a 5k in under 23 minutes with no training, and the LA Downtown Ketchum Stair Climb, which was a stair climb to the top of a 76-story skyscraper, in 19 minutes. These are not Olympic numbers, but I did all this without needing tons of protein or carbs immediately before or after. I hope you find that reasonable amounts of healthy fat as a source of energy puts you on a different level from just pounding protein and carbs.
Let me know in the comments if you try this and how it goes for you! If I’ve made this concoction for you before, let others know how it tasted what it felt like to drink it. I think a lot of people are curious about what butter in coffee would be like, and they will be surprised by how good it can be if done right.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
I am an affiliate of the BULLETPROOF® site and earn a fee from any purchase there made through my site.